From 159d45df0fd6da5591bea1729baa07cf05f89fef Mon Sep 17 00:00:00 2001 From: Andrew Z Date: Fri, 10 Nov 2023 16:05:46 -0500 Subject: [PATCH] Update --- applicationFeed-raw.json | 2 +- languageErrors.json | 34 ++++++++++++++ log.txt | 6 ++- old-applicationFeed-raw.json | 87 +++++++++++++++++++++++++++++++++--- 4 files changed, 121 insertions(+), 8 deletions(-) diff --git a/applicationFeed-raw.json b/applicationFeed-raw.json index 9585a477a..88111d889 100644 --- a/applicationFeed-raw.json +++ b/applicationFeed-raw.json @@ -271822,8 +271822,8 @@ ], "downloads": 110, "stars": 2, - "LastUpdate": 1699636060, "LastUpdateScan": 1699643152, + "LastUpdate": 1699636060, "FirstSeen": 1699643152 }, { diff --git a/languageErrors.json b/languageErrors.json index 064d14b43..92a7d192c 100755 --- a/languageErrors.json +++ b/languageErrors.json @@ -1608,11 +1608,20 @@ "/Tips and Tweaks/tipsandtweaks.txt": [ "> For streaming and gaming VMs, set the values low in the single digits. Recommended values are: vm.dirty_background_ratio" ], + "/Unassigned Devices/fsck.txt": [ + "Cannot determine file system on an encrypted disk", + "Executing file system check", + "Executing file system scrub" + ], "/Unassigned Devices/unassigneddevicessettings.txt": [ "> **Note:** The normal rule used by UD is '*(sec" ], "/Unassigned Devices/unassigneddevices.txt": [ + "Changing the Mount Point will also change the disk label on all disks and the pool name on a ZFS disk", + "Enter the server name and it will be added to the local DNS names and will then resolve by name", "failed to", + "If the IP address of the server shows in the list after searching, your DNS server is not resolving the name", + "If shares do not show, check your credentials", "Remote Server is", "Remote share mounts are dependent on a solid and reliable network connection and that can be difficult to achieve", "> Note: /dev/sdX where 'X' is the device designator. The devX is the device name in the UD page. If the device name is 'Dev 1', then use dev1 as the device to spin down. Using the name" @@ -1777,7 +1786,11 @@ "> **Note:** The normal rule used by UD is '*(sec" ], "/Unassigned Devices/unassigneddevices.txt": [ + "Changing the Mount Point will also change the disk label on all disks and the pool name on a ZFS disk", + "Enter the server name and it will be added to the local DNS names and will then resolve by name", "failed to", + "If the IP address of the server shows in the list after searching, your DNS server is not resolving the name", + "If shares do not show, check your credentials", "Remote Server is", "Remote share mounts are dependent on a solid and reliable network connection and that can be difficult to achieve", "> Note: /dev/sdX where 'X' is the device designator. The devX is the device name in the UD page. If the device name is 'Dev 1', then use dev1 as the device to spin down. Using the name" @@ -2291,7 +2304,11 @@ "> **Note:** The normal rule used by UD is '*(sec" ], "/Unassigned Devices/unassigneddevices.txt": [ + "Changing the Mount Point will also change the disk label on all disks and the pool name on a ZFS disk", + "Enter the server name and it will be added to the local DNS names and will then resolve by name", "failed to", + "If the IP address of the server shows in the list after searching, your DNS server is not resolving the name", + "If shares do not show, check your credentials", "Remote Server is", "Remote share mounts are dependent on a solid and reliable network connection and that can be difficult to achieve", "> + '/usr/local/sbin/rc.unassigned mount name", @@ -7952,7 +7969,11 @@ "> **Note:** The normal rule used by UD is '*(sec" ], "/Unassigned Devices/unassigneddevices.txt": [ + "Changing the Mount Point will also change the disk label on all disks and the pool name on a ZFS disk", + "Enter the server name and it will be added to the local DNS names and will then resolve by name", "failed to", + "If the IP address of the server shows in the list after searching, your DNS server is not resolving the name", + "If shares do not show, check your credentials", "Remote Server is", "Remote share mounts are dependent on a solid and reliable network connection and that can be difficult to achieve", "> + '/usr/local/sbin/rc.unassigned mount name", @@ -9405,7 +9426,11 @@ "> **Note:** The normal rule used by UD is '*(sec" ], "/Unassigned Devices/unassigneddevices.txt": [ + "Changing the Mount Point will also change the disk label on all disks and the pool name on a ZFS disk", + "Enter the server name and it will be added to the local DNS names and will then resolve by name", "failed to", + "If the IP address of the server shows in the list after searching, your DNS server is not resolving the name", + "If shares do not show, check your credentials", "Remote Server is", "Remote share mounts are dependent on a solid and reliable network connection and that can be difficult to achieve", "> + '/usr/local/sbin/rc.unassigned mount name", @@ -13801,11 +13826,20 @@ "Sign In requires the local unraid-api to be running", "Sign Out requires the local unraid-api to be running" ], + "/Unassigned Devices/fsck.txt": [ + "Cannot determine file system on an encrypted disk", + "Executing file system check", + "Executing file system scrub" + ], "/Unassigned Devices/unassigneddevicessettings.txt": [ "> **Note:** The normal rule used by UD is '*(sec" ], "/Unassigned Devices/unassigneddevices.txt": [ + "Changing the Mount Point will also change the disk label on all disks and the pool name on a ZFS disk", + "Enter the server name and it will be added to the local DNS names and will then resolve by name", "failed to", + "If the IP address of the server shows in the list after searching, your DNS server is not resolving the name", + "If shares do not show, check your credentials", "Remote Server is", "Remote share mounts are dependent on a solid and reliable network connection and that can be difficult to achieve", "> Note: /dev/sdX where 'X' is the device designator. The devX is the device name in the UD page. If the device name is 'Dev 1', then use dev1 as the device to spin down. Using the name" diff --git a/log.txt b/log.txt index 0b27afdbf..0df214c66 100644 --- a/log.txt +++ b/log.txt @@ -3829,10 +3829,12 @@ Processing /tmp/appFeed/templates/PeteAskingsRepository/XMLSettings.xml...Succes Updating stats on containers -bellamy/wallos -bellamy/wallos:latest Downloads: 110 Stars: 2 Base: unknown Privileged: 102 + +No change to feed + + Updating GitHub diff --git a/old-applicationFeed-raw.json b/old-applicationFeed-raw.json index 14a1ee14c..9585a477a 100644 --- a/old-applicationFeed-raw.json +++ b/old-applicationFeed-raw.json @@ -271742,12 +271742,89 @@ "FirstSeen": 1666973046 }, { - "TemplatePath": "/tmp/appFeed/templates/ZappyZapsRepository/wallos.xml", - "errors": [ - "Opening and ending tag mismatch: Container line 2 and Support", - "Extra content at the end of the document" + "Name": "Wallos", + "Repository": "bellamy/wallos:latest", + "Registry": "https://hub.docker.com/r/bellamy/wallos", + "Network": "bridge", + "Shell": "sh", + "Privileged": "false", + "Support": "https://forums.unraid.net/topic/147706-support-devzwf-wallos", + "Overview": "Wallos is a powerful, open-source, and self-hostable web application designed to empower you in managing your finances with ease. Say goodbye to complicated spreadsheets and expensive financial software \u2013 Wallos simplifies the process of tracking expenses and helps you gain better control over your financial life.", + "WebUI": "http://[IP]:[PORT:80]/", + "TemplateURL": "https://raw.githubusercontent.com/devzwf/unraid-docker-templates/master/wallos.xml", + "Icon": "https://raw.githubusercontent.com/devzwf/unraid-docker-templates/main/images/wallos.png", + "ExtraParams": "--restart unless-stopped", + "DonateText": "Don't donate to me! Instead, please donate the creators of the apps, but if you insist ", + "DonateLink": "https://ko-fi.com/devzwf", + "Config": [ + { + "@attributes": { + "Name": "Database Dir", + "Target": "/var/www/html/db", + "Default": "/mnt/user/appdata/wallos/db", + "Mode": "rw", + "Description": "Database Directory", + "Type": "Path", + "Display": "always", + "Required": "true", + "Mask": "false" + }, + "value": "/mnt/user/appdata/wallos/db" + }, + { + "@attributes": { + "Name": "Logos Dir", + "Target": "/var/www/html/images/uploads/logos", + "Default": "/mnt/user/appdata/wallos/logos", + "Mode": "rw", + "Description": "Logos directory", + "Type": "Path", + "Display": "always", + "Required": "true", + "Mask": "false" + }, + "value": "/mnt/user/appdata/wallos/logos" + }, + { + "@attributes": { + "Name": "Time Zone", + "Target": "TZ", + "Default": "America/Toronto", + "Mode": "", + "Description": "", + "Type": "Variable", + "Display": "always", + "Required": "false", + "Mask": "false" + }, + "value": "America/Toronto" + }, + { + "@attributes": { + "Name": "WebUI", + "Target": "80", + "Default": "8282", + "Mode": "tcp", + "Description": "", + "Type": "Port", + "Display": "always", + "Required": "true", + "Mask": "false" + }, + "value": "8282" + } ], - "FirstSeen": null + "Repo": "ZappyZap's Repository", + "ChangeLogPresent": true, + "templatePath": "/tmp/GitHub/AppFeed/templates/ZappyZapsRepository/wallos.xml", + "CategoryList": [ + "Productivity" + ], + "downloads": 110, + "stars": 2, + "LastUpdate": 1699636060, + "LastUpdateScan": 1699643152, + "FirstSeen": 1699643152 }, { "Name": "AllTube-Download-yt-dlp",