https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/domoticz.xml False HomeAutomation: Network:Management 2017-02-11 domoticz https://forums.unraid.net/topic/53519-support-linuxserverio-domoticz/ linuxserver/domoticz https://www.domoticz.com stable-3.5877 This is the stable version 3.5877 of Domoticz https://hub.docker.com/r/linuxserver/domoticz/ bridge false Domoticz is a Home Automation System that lets you monitor and configure various devices like: Lights, Switches, various sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water and much more. Notifications/Alerts can be sent to any mobile device http://[IP]:[PORT:8080]/ https://github.com/domoticz/domoticz/raw/master/www/images/logo.png Domoticz is a Home Automation System that lets you monitor and configure various devices like: Lights, Switches, various sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water and much more. Notifications/Alerts can be sent to any mobile device To get full use of Domoticz, you probably have a USB device you want to pass through. To figure out which device to pass through, you have to connect the device and look in dmesg for the device node created. Issue the command 'dmesg | tail' after you connected your device and you should see something like below.[br] [br] [i]usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0[/i] [br][br] [b][u][span style='color: #E80000;']Configuration[/span][/u][/b][br] [b]/config[/b] Where domoticz should store settings, logs and configuration[br] [b]--device=/dev/ttyUSB0[/b] In Extra Parameters for the example above (Switch on Advanced View) bridge 1443 1443 tcp 6144 6144 tcp 8080 8080 tcp /config rw 99 PUID 100 PGID Donations https://www.linuxserver.io/donate https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/donate.png lsiobase/alpine