https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/domoticz.xml
False
HomeAutomation: Network:Management
2017-02-11
domoticz
https://forums.unraid.net/topic/53519-support-linuxserverio-domoticz/
linuxserver/domoticz
https://www.domoticz.com
stable-3.5877
This is the stable version 3.5877 of Domoticz
https://hub.docker.com/r/linuxserver/domoticz/
bridge
false
Domoticz is a Home Automation System that lets you monitor and configure various devices like: Lights, Switches, various sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water and much more. Notifications/Alerts can be sent to any mobile device
http://[IP]:[PORT:8080]/
https://github.com/domoticz/domoticz/raw/master/www/images/logo.png
Domoticz is a Home Automation System that lets you monitor and configure various devices like: Lights, Switches, various sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water and much more. Notifications/Alerts can be sent to any mobile device
To get full use of Domoticz, you probably have a USB device you want to pass through. To figure out which device to pass through, you have to connect the device and look in dmesg for the device node created. Issue the command 'dmesg | tail' after you connected your device and you should see something like below.[br]
[br]
[i]usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0[/i]
[br][br]
[b][u][span style='color: #E80000;']Configuration[/span][/u][/b][br]
[b]/config[/b] Where domoticz should store settings, logs and configuration[br]
[b]--device=/dev/ttyUSB0[/b] In Extra Parameters for the example above (Switch on Advanced View)
bridge
1443
1443
tcp
6144
6144
tcp
8080
8080
tcp
/config
rw
99
PUID
100
PGID
Donations
https://www.linuxserver.io/donate
https://raw.githubusercontent.com/linuxserver/docker-templates/master/linuxserver.io/img/donate.png
lsiobase/alpine